F Series Filters
Air flow rate from 33m³/h to 31000 m³/h
STANDARD CONDITIONS:
-
Ambient temperature: 25°C
-
Working pressure: 7 bar
-
Max working pressure: 16 bar
-
(13 bar on F0440)
-
Inlet air temperature: 20°C
-
Max inlet air temperature: 100°C (60°C on CF)
Share
Our longest running filters series, efficient and reliable, with many accessories available. F filters series covers a wide range of flow rates up to 31.000 m³/h with the small models made in die-cast aluminum and the bigger ones in carbon steel.
- QF: Pre-filter suitable for the removal of solid particles down to 1 micron including emulsions and oil particles. The strong mechanical resistance makes this filter the ideal initial protection of a compressed air system to retain impurities and, for example, it is suitable as a post-filter for adsorption dryers.
- PF-HF: Interception type filters suitable for solid and oil particles up to 0,01 micron - 0,01 mg/m³ (HF). These filters, by means of the impact, interception and coalescing principles, compel the submicronic liquid particles, which from the inside strain through the element, to collide and thus become larger micro droplets, which will drip the bottom of the filter housing.
- CF: There are treatments in industrial plants, which in addition to oil free air, require the elimination of oil vapors and odors. For these purposes, the activated carbon filter through the adsorption process attracts all odors and vapors left after desoiling and keep them on the surface of the activated carbon grain molecules. Owing to this PF or HF filters have to be placed before the CF filters. The element is made by thick activated carbon layer covered by fiber coating kept in place by an inside and outside stainless steel wall.
Features
Our longest running filters series, efficient and reliable, with many accessories available. F filters series covers a wide range of flow rates up to 31.000 m³/h with the small models made in die-cast aluminum and the bigger ones in carbon steel.
- QF: Pre-filter suitable for the removal of solid particles down to 1 micron including emulsions and oil particles. The strong mechanical resistance makes this filter the ideal initial protection of a compressed air system to retain impurities and, for example, it is suitable as a post-filter for adsorption dryers.
- PF-HF: Interception type filters suitable for solid and oil particles up to 0,01 micron - 0,01 mg/m³ (HF). These filters, by means of the impact, interception and coalescing principles, compel the submicronic liquid particles, which from the inside strain through the element, to collide and thus become larger micro droplets, which will drip the bottom of the filter housing.
- CF: There are treatments in industrial plants, which in addition to oil free air, require the elimination of oil vapors and odors. For these purposes, the activated carbon filter through the adsorption process attracts all odors and vapors left after desoiling and keep them on the surface of the activated carbon grain molecules. Owing to this PF or HF filters have to be placed before the CF filters. The element is made by thick activated carbon layer covered by fiber coating kept in place by an inside and outside stainless steel wall.